TECHNICAL DATA-B.11 Outside Dia. of Impeller Water Pump Seal Type 3.094/3.125 in (78,588179,375 mm) Synthetic Rubber-Carbon Faced FUEL SYSTEM 4.108,4.107,4.99 Approved Fuel Oil Specification United Kingdom 8S.2869:1967 United States VV-F-800a AS.T.M.lD975-66T France (J.O. 14/9/57) India IS: 1460/1968 Germany DIN-51601 (1967) Class A1 or A2 Grades OF-A, or DF-2. Nos. 1-0 or 2-D. Gas Oil or Fuel Domestique Grade Special or Grade A Italy CUNA-Gas Oil NC-630-01 (1957) Sweden SIS. 155432 (1969) Switzerland Federal Military Spec. 9140-335-1404 (1965) Fuel oils available in territories other than those listed above which are to an equivalent specification may be used.
Fuel Lift Pump Type Spring Colour Code Method of Drive Total Stroke of Operating Lever Static Pressure-No Delivery Pump to Distance Piece Gasket Thickness ... Distance Piece-Lift Pump to Tappet Inspection Cover AC Delco Diaphragm 'Y J' Series Green From Eccentric on Camshaft via Push rod 0.192 in (4,877 mm) 4-7 Ibflin 2 (0,28-0,49 kgflcm2) - 28-48 kN/m 2 0.018/0.022 in (0,457/0,559 mm) 0.256 in (6,502 mm) Final Fuel Filter Element Type Overflow Valve Type Valve in Fuel Pump Drain Connection Paper Gravity 8all Check Valve Spring Loaded Non-Return Valve set at 0.71-1.25 Ibflin 2 (0,0522-0,0875 kgflcm2) - 5-9 kN/m 2 Fuel Injection Pump Make Type Rotation Plunger Dia. CAV. D.P.A.
Clockwise (Viewed from Drive End) 6 mm Hydraulically Governed Timing Letter No. 1 Cylinder Outlet 4.108 A W 4.107 4.99 A W Mechanically Governed Timing Letter No. 1 Cylinder Outlet C W c W C W