4. TRAVEL SPEED SWITCH This is used to select the two travel speeds. Lo lights up: Low speed travel Hi lights up: High speed travel * When traveling in Hi, the travel speed is automatically switched to low speed travel (Lo) to match the travel surface on soft ground or when traveling uphill, so there is no need to operate this switch. * If this switch is operated when the machine is traveling, it may cause deviation, so always stop the machine before operating the switch. 5. ALARM BUZZER STOP SWITCH This switch is used to stop the alarm buzzer when it has sounded to warn of some abnormality while the engine is running. 6. LAMP SWITCH This lights up the head lamps and panel lamps. Position 1:
Panel lamps light up Position 2: Panel lamps and head lamps light up OFF: Panel lamps and head lamps are OFF 7. WIPER SWITCH This operates the wipers for the front window. Lo lights up: Intermittent wiper operation Hi lights up: Continuous wiper operation OFF: Wipers stopped - 18-