Introduction General repair instructions 123163-004 Gib head key joints 1044-004 Dismounting ►Slacken off gib head key (1) with a blow if possible. ►Use an auxiliary tool (2) if required. 7 154811-001 ►Drive out the gib head key (2) with a key drawer (1). ►Ensure that the key drawer is used as shown in the figure. 1 2 154813-001 8 9 154812-001 Installation The gib head key (1) comes in raw condition as a spare part and must be machined to suit the application by milling or grinding. 00 0296 433 2 - RHB Dieselmotor OM906/926LA - 10/2014 11 2 1 1 2