. SAFETY GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE EMERGENCY EXIT FROM OPERATOR'S CAB Machines equipped with a cab have doors on the left and right sides. If the door on the one side does not open, escape from the door on the other side. DO NOT GET CAUGHT IN ARTICULATING PORTION AND DUMP BODY If the clearance at the articulating portion changes and you get caught in it, you will suffer serious personal injury or death. Do not allow anyone to come inside the articulation range. The clearance in the area around the dump body changes according to the movement of the dump body. If you are caught, there is danger that you will suffer serious injury or death.
Do not allow anyone near any of the rotating or telescopic parts. and perform may lead to an 2 - 18 PRECAUTIONS RELATED T O PROTECTIVE STRUCTURES pped with a structure (such as ator by absorbing the impact ed with ROPS, if the machine tified value (shown on the STRUCTURE (ROPS) not be able to fulfill its function. beyond the certified value by g attachments to the machine. e equipment is impeded, the le to protect the operator, and death. Always observe the a protective structure, do not remove the protective struct The operator's compartment is equi ROPS, FOPS) to protect the oper energy.
As for the machine equipp weight (mass) exceeds the cer ROLL-OVER PROTECTIVE CERTIFICATION plate), ROPS will Do not increase machine weight modifying the machine or by installin Also, if the function of the protectiv protective equipment will not be ab the operator may suffer injury or following. If the machine is equipped with operations without it. If the protective structure is weld ed, or holes are drilled in it, or it is modified in any other way, drop. Consult your Komatsu dist ributor before performing any modifications .
If the protective structure is dama ged or deformed by falling objects or by rolling over, its strengt and it will not be able to fulfill its advice on the method of repair. function properly. In such cases, always contact your Koma installed, always fasten your seat belt properly when operat t properly, it cannot display its effect. Even if the protective structure is If you do not fasten your seat bel UNAUTHORIZED MODIFICA TION Komatsu will not be responsible f or any injuries or death, accidents, product failures or other p resulting from modifications mad e without authorization from Komatsu. Any modification made without a uthorization from Komatsu can create hazards.
Before makin consult your Komatsu distributor. ty of the dump body or make any other modifications. Such Do not try to increase the capaci cause a drop in the braking effic unexpected accident. iency, the balance of the machine will become poor, and thi