GENERAL 2-19 3. Tighten the bolt to the specified torque. A and then tighten B CAUTION If the belt tension is too excessive, noise as well as early wear of belt occurs and the water pump bearing and alternator bearing are damaged. If the belt is too loose, due to early wear of belt and insufficient power of alternator, battery and water pump become inefficient and finally en- gine is overheated or damaged. CHECKING BELT FOR DAMAGE Check the following items and replace the belt if defective. Cambus 1. Check the belt surface for damage, wear and crack. 2. Check the belt surface for oil or grease contamination. Ribbed rubber 3. Check the rubber part for wear or hardening. Adhesive rubber 4.
Check the pulley surface for crack or damage. Inner wire L4GC028A