www.changlin.com.cn General Information Cummins Engine Company, Inc. recommends that the engine be maintained according to the Maintenance Schedule in this section. If the engine is operating in ambient temperatures consistently below-18°C [0°F] orabove38°C [100°F], perform maintenance at shorter intervals. Shorter maintenance intervals are also required if the engine is operated in a dusty environment or if frequent stops are made. See your Cummins Authorized Repair Location for recommended intervals. Use the chart provided at the end of this section as a convenient way to keep a record of maintenance performed.
Tool Requirements In the text, a symbol followed by the wrench size or tool description in used to identify the tooling required to perform each step. A list of wrench sizes and descriptions indicate more than one tool is needed. Feeler Gauges (0.25 mm and 0.51 mm) Engine Barring Gear Part NO. 3377371. 29 / 167 pages Sockets Wrenches Other Tools 19mm 19mm Fuel line nuts 17mm 17mm Filter Wrenches (75-80mm and 90-95mm) 15mm 15mm Ratchet (1/2 inch drive) 14mm Torque Wrench 13mm Flat Blade Screwdriver 10mm 5/16 Allen Wrench