www.changlin.com.cn NOTE: Fill the filters with clean lubricating oil before installation. Apply a light film of lubricating oil to the gasket sealing sur- face before installing the filters. Caution: Mechanical over-tightening can distort the threads or damage the filter element seal. Install the filter as specified by the filter manufacturer. 17 mm Check and clean the oil drain plug threads and sealing surface. Install the oil drain plug.Torque Value: 80 N*m [60 ft-lb] NOTE: Use high quality multi-grade lubricating oil meeting the American Petroleum Institute (API) classification of CE/ SG as outlined in Specifications and Torque Values (Section V). NOTE:
CD/SF oil can be used in areas where CE/SG oil is not yet available. If CD/SF oil is used, change the oil at one-half the recommended intervals. 40 / 167 pages