www.changlin.com.cn Caution: To prevent damage to the engine or pin, be sure do disengage the pin after locating TDC. Feeler Gauge Intake Clearance: 0.254 mm [0.010 IN] Exhaust Clearance: 0.508 mm [0.020 IN ] Check/set valves with engine cold-below 60°C [140°F]. NOTE: The clearance is correct when some resistance i “felt” when the feeler gauge is slipped between the valvi stem and the rocker lever. Four Cylinder Engine Adjustment 14 mm, Flat blade Screwdriver Locate Top Dead Center (TDC) for Cylinder Number 1. Check / adjust the valves as indicated in the illustration (1 = Intake; E = Exhaust). Tighten the locknut and measure the valve lash again. Torque Value:
24 N*m [18 ft-lb] 53 / 167 pages