Safety - Section 20 OM2033 Page 20-4 General Safety PRECAUTIONS WHEN USING ROPS The ROPS is integrated into the cab design to protect the operator if the machine should roll over. It is designed not only to support the load if the machine should roll over, but also to absorb the impact energy. The Komatsu ROPS fulfills all of the regulations and standards for all countries, but if it is rebuilt without authorization or is damaged when the machine rolls over, the strength will drop and it will not be able to fulfill its function properly. It can only display its performance if it is repaired or modified in the specified way.
NEVER modify or repair the ROPS, unless authorized by the Komatsu distributor. The ROPS cannot provide its full protection if the operator does not fasten the seat belt properly. Always fasten the seat belt when operating. PRECAUTIONS FOR ATTACHMENTS When installing and using an optional attachment, read the instruction manual for the attachment and the information related to attachments in this manual. Do not use attachments that are not authorized by Komatsu or your Komatsu distributor. Use of unauthorized attachments could create a safety problem and adversely affect the proper operation and useful life of the machine.
Any injuries, accidents, and product failures resulting from the use of unauthorized attachments will not be the responsibility of Komatsu. PRECAUTIONS FOR STARTING MACHINE START THE ENGINE FROM THE OPERATOR’S SEAT ONLY. NEVER ATTEMPT TO START THE ENGINE BY SHORTING ACROSS THE STARTER TERMINALS. This may cause fire, or serious injury or death to anyone in machine’s path.