余 : Rating over-front : Rating over-side or 360 degree 余 Lift‐point height (m/ft) 7.5m kg 24.6ft lb 6.0m kg 19.7ft lb 4.5m kg 14.8ft lb 3.0m kg 9.8ft lb 1.5m kg 4.9ft lb 0.0m kg 0.0ft lb ‐1.5m kg ‐4.9ft lb ‐3.0m kg ‐9.8ft lb ‐4.5m kg ‐14.8ft lb Note 1. 2. Lifting capacity are based on ISO 10567. Lifting capacity of the HX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. The Lift-point is bucket pivot mounting pin on the arm (without bucket mass). * Indicates load limited by hydraulic capacity. 3. 4. 侍 Lifting capacities are based upon a standard machine conditions.
Lifting capacities will vary with different work tools, ground conditions and attachments. The difference between the weight of a work tool attachment must be subtracted. Consult your Hyundai dealer regarding the lifting capacities for specific work tools and attachments. Failure to comply to the rated load can cause possible personal injury or property damage. Make adjustments to the rated load as necessory for non-standard configurations. B Model Type Boom oom Length Length Arm type type [mm] [mm] Capa.
BK type [㎥] Swi QC Po ng CWT[kg] ( st Shoe O wheel) [mm] uttriger F] [ Outtriger[ R] Cabin type HX220HD OPT MONO GP 5680 GP 2400 GP 0.92 NO N O 3600 600 NONE NONE CABIN Lift‐point radius At max.
reach 3.0m (9.8ft) 4.5m (14.8ft) 6.0m (19.7ft) 7.5m (24.6 ft) Capacity Reach m(ft) *5080 *11200 *5080 *11200 5.58 (18.3) *4980 487 *10980 1074 0 0 *4620 *10190 3900 8600 6.81 (22.4) *6320 *6320 *13930 *13930 *5430 471 *11970 1038 0 *4990 3 0 *11000 7 270 *4490 210 *9900 3230 7120 7.55 (24.8) *8110 6810 *17880 15010 *6200 448 *13670 988 0 5010 3 0 11050 7 190 4570 030 10080 2910 6420 7.94 (26.1) *9660 6340 *21300 13980 6860 425 15120 937 0 4900 3 0 10800 6 090 4420 810 9740 2790 6150 8.03 (26.3) *10360 6140 *22840 13540 6690 410 14750 904 0 4820 3 0 10630 6 020 4540 660 10010 2850 6280 7.83 (25.7) *10820 *10820 *10290 6110 *23850 *23850 *22690 13470 6640 406 14640 895 0 0 5010 11050 3130 6900 7.31 (24.0) *13210 12210 *9460 6220 *29120 26920 *20860 13710 6740 414 14860 913 0 0 6140 13540 3820 8420 6.41 (21.0) *7130 6530 *15720 14400 *6300 *13890 5820 12830 4.89 (16.0)