OP001759 1-51 Safety DX225LCA A Track Width : 2.99 m (9’ 10") LC Track Boom : 5.7 m (18’ 8") Arm : 2.9 m (9’ 6") Bucket : SAE 0.92 m3 (CECE 0.81 m3) Counterweight : 4,100 kg (9,039 Ib) B Shoe : 600 mm (24") : Rating Over Front : Rating Over Side or 360 degree Unit : 1,000 kg (1,000 lb) Figure 51 FG027266 1,000 kg A (m) B (m) 2 3 4 5 6 7 8 Max.
Reach A (m) 8 * 3.42 * 3.42 5.94 7 * 3.31 * 3.31 6.85 6 * 4.53 * 4.53 * 4.39 3.84 * 3.30 * 3.30 7.51 5 * 4.87 * 4.87 * 4.69 3.79 * 3.36 2.99 7.99 4 * 5.95 * 5.95 * 5.37 4.79 * 4.99 3.72 * 4.50 2.95 * 3.48 2.75 8.32 3 *11.94 *11.94 * 8.57 * 8.57 * 6.92 6.19 5.97 4.64 * 5.36 3.62 4.67 2.90 * 3.65 2.59 8.52 2 * 7.08 * 7.08 *10.19 8.36 * 7.89 5.93 * 6.58 4.49 4.26 2.70 4.61 2.84 * 3.89 2.51 8.60 1 * 5.62 * 5.62 *11.36 8.03 * 8.69 5.73 * 7.11 4.36 4.16 2.61 4.55 2.79 4.09 2.50 8.56 0 * 3.08 * 3.0 8 * 6.66 * 6.66 *11.94 7.85 * 9.21 5.59 7.05 4.26 4.09 2.54 4.51 2.75 4.18 2.54 8.40 -1 * 5.53 * 5.5 3 * 8.59 * 8.59 *12.03 7.77 9.40 5.51 6.98 4.19 4.05 2.50 4.48 2.73 4.39 2.67 8.11 -2 * 7.92 * 7.9 2 *11.11 *11.11 *11.71 7.77 * 9.28 5.48 6.96 4.17 4.06 2.51 4.76 2.90 7.69 -3 *10.58 *10.5 8 *14.12 *12.89 *10.99 7.82 * 8.81 5.51 6.98 4.19 4.41 2.829 7.09 -4 *13.78 *13.7 8 *12.36 *12.36 * 9.77 7.94 * 7.86 5.59 * 6.29 4.26 * 5.86 4.00 6.28 -5 * 9.77 * 9.77 * 7.80 * 7.80 * 6.10 5.75 * 5.85 * 5.50 5.15 FEET 1,000 Ib A (ft) B (ft) 10 15 20 25 MAX.
REACH A (ft) 25 * 8.41 * 8.41 * 7.41 * 7.41 20.73 20 * 9.94 * 9.94 * 7.28 * 7.28 24.45 15 * 11.10 10.46 * 10.37 7.16 * 7.50 6.34 26.73 10 * 25.44 * 25.44 * 16.42 15.73 * 12.94 10.00 11.16 6.95 * 8.03 5.73 27.93 5 * 13.83 * 13.83 * 20.28 14.71 * 14.86 9.52 10.91 6.72 * 8.91 5.51 28.20 0 * 15.25 * 15.25 * 22.52 14.09 15.16 9.16 10.71 6.53 9.21 5.61 27.56 -5 * 22.18 * 22.18 * 22.80 13.87 14.97 9.00 10.63 6.46 10.05 6.12 25.95 -10 * 30.58 27.61 * 21.20 13.95 * 15.02 9.03 12.02 7.31 23.15 -15 * 23.99 * 23.99 * 17.02 14.32 * 12.97 10.35 18.64 -20 * 8.41 * 8.41 * 7.41 * 7.41 20.73 1. LOAD POINT IS THE HOOK ON THE BACK OF THE BUCKET. 2. * RATED LOADS ARE BASED ON HYDRAULIC CAPACITY. 3.
RATED LOADS DO NOT EXCEED 87% OF HYDRAULIC CAPACITY OR 75% OF TIPPING CAPACITY.