MODE SELECTOR BUTTONS 1. Power Mode Selector Button 1 2 2. Auto Idle Selector Button POWER 3. Flow Control Button 1 3 2 AUTO 4 ESC 5 6 7 3 8 FG014203 Figure 63 1. Power Mode Selector Button This power mode is suitable for heavy-duty work that requires a high operating speed. Push this button to turn power mode "ON" or "OFF." When the power mode button is pushed to the "ON" position, an indicator light above it turns "ON." POWER When the power mode button is pushed again, it is turned "OFF" and the power mode is deactivated and returns to the standard operating mode.
1 When turning the engine starter switch to the "I" (ON) position, the power mode is automatically defaulted to "Standard Mode." Figure 64 FG000063 NOTE: For further details, see “Mode Selection” on page 3-22. 2. Auto Idle Selector Button When the auto idle system is activated, the engine will automatically reduce speed to "IDLE" approximately four seconds after all of the control levers are in the neutral position. This system is designed to reduce fuel consumption and noise.
When the auto idle selector button is pushed to the "ON" position, an indicator light above it turns "ON." 2 AUTO When the auto idle selector button is pushed again, it is turned "OFF" and the engine speed will return to the setting of the engine speed dial and will remain at this speed despite control lever position, until engine speed dial is moved. FG000065 Figure 65 OP001760 Operating Controls 2-30