Fuel System 60 UENR0623-02 If you inspect the engine in operation, always use the proper inspection procedure in order to avoid a fluid penetration hazard. Refer to Operation and Maintenance Manual, “General hazard Information”. If the engine will not start, refer to Troubleshooting, “Engine Cranks but will not Start”. i05241801 Fuel System Pressure - Test Table 4 (1) Pressure gauge needs to be able to measure pressure in a vacuum. NOTICE Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.
Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, “General Hazard Information and High Pressure Fuel Lines” for safety information. Refer to Systems Operation, Testing and Adjust- ing, “Cleanliness of Fuel System Components” for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. Note: Ensure that the engine is stopped before installing and removing Tooling (A) and (B) or carrying out any repair work on the fuel system. Required Tools Tool Part Number Part Description Qty A - Pressure gauge (1) 1 B T400138 Pressure test kit 1