SAFETY PLATES 9. Accumulator (OPTIONAL EQUIPMENT) WARNING HIGH PRESSURE AND BURN HAZARD 1. When breakdown or trouble devel- ops in the accumulator, do not at- tempt to disassemble or repair. Al- ways contact your nearest author- ized service station. 2. Do not attempt to fill or re-fill with gas. Authorized servicemen, or per- sons licensed to handle high pres- sure gases, are the only persons al- lowed. 3. Never hammer a gas filled accumu- lator, or place one close to a fire. 4. Never attempt to attach a part to or bore a hole in the accumulator's wall. 5. Always completely exhaust the ac- cumulator of all contaminated gas when disassembling or discarding the accumulator. 6.
To exhaust the gas, use the air relief valve mounted on the accumulator. When there is no such valve, re- move the accumulator's gas filling valve cap and release the gas by de- pressing the valve core (pin) with a suitable tool (screw driver). (1) Type of gas - Nitrogen (2) Maximum Working Pressure - 210 bar (3) Testing Pressure - 315 bar Do not risk serious injury or death. RWA16890 10. Hot Water Hazard WARNING Hot Water Hazard. To prevent the sudden re- lease of hot water: • Turn off engine. • Allow water to cool. • Slowly loosen cap to re- lieve pressure before re- moving. Do not risk serious injury. RWA16910 24