PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8 PRECAUTIONS TO BE TAKEN DURING MAINTENANCE 2.8.1 WARNING PLATES Before starting any maintenance operation, position the ma- chine on a firm and level surface, rest the equipment onto the ground, engage the safety locks of either the equipment and the controls and stop the engine. If another person starts the engine and operates the control le- vers while the operator is providing for service, this may result in serious injuries or even death. DANGER DO NOT OPERATE When this tag is not being used, keep it in the storage compartment.
To avoid these risks, always attach warning plates to the control levers and to the ignition key before performing any mainte- nance operation; if necessary, attach additional warning tags al- so around the machine and in particular on the cab door handles. RWA24190 DANGER DO NOT OPERATE When this tag is not being used, keep it in the storage compartment. RWA16850 2.8.2 TOOLS Use only the tools provided with the machine and high-quality tools suitable for the tasks to be performed. Do not use worn, damaged, low-quality tools or tools that are not suitable for the tasks to be performed, in order to avoid any personal injury.
After use, always clean the tools carefully and put them in the appropriate compartment (1) positioned inside the seat support. To reach the tool compartment, unlock the seat and rotate it for- wards. (See “3.5.5 SEAT”). RWA01310 RWA05400 55