WARNING: Failure to follow these safety precautions may lead to a serious accident. SAFETY Walk around your machine again just before mounting it, and check for people and objects that might be in the way. Never start the engine if a warning tag has been attached to control lever. When starting the engine, sound the horn as an alert. Start and operate the machine only while seated. An additional worker may ride in the machine only when sitting in the passenger seat. Do not allow anyone to ride on the machine body. Do not leave tools, spare parts or personal items lying around in the operators compartment. They may dama ge, break or jam the control levers or switches.
Always put them in their proper place. Keep the cab floor, controls, steps and handrails free of oil, grease, snow, and excess dirt. Check the seat belt, buckle and hardware for damage or wear. Replace any worn or damaged parts. NEVER use bleach, dye or solvents on the seat belt because this may weaken the webbing and result in personal injury. Clean the seat belt with warm water and a mild detergent. ALWAYS use seat belts when operating your machine. Seat belts Do not service the air conditioning system unless you have the proper equipment that complies with all government regulations. It is unlawful to discharge freon into the atmosphere.
Know the alternate exit routes from the operators compartment for use in an emergency. WA380-3MC 1-9 WHEN STARTING ENGINE IN OPERATORS CAB