. SAFETY SAFETY MAINTENANCE INFORMATION removal or installation not fall. And take steps to support the work of the work equipment and the machine is supported any of the control levers is is damage occurring to the or the machine will 2 - 36 ATTACHMENTS Appoint a leader before start operations for attachments. Place attachments that have been a s table condition so that they d prevent unauthorized persons fro WORK UNDER THE MACHINE If it is necessary to go under the w to carry out service and main equipment and machine securely enough to support the weight machine. It i s extremely dangerous to work shoes are lifted off the ground a only with the work equipment.
If onl touched by accident, or there hydraulic piping, the work equ suddenly drop. This is extremely the work equipment or the machi NOIS E When carrying out maintenance of th e engine and you are exposed to noise for long perio ds of time, we ar ear covers or ea r plugs while working. loud, it may cause temporary or permanent hearing problems. If t he noise from the machine is too loud, it may cause temporary or permanent hearing WHEN USING HAMMER out or metal particles may be injury. Always do as follows. ucket teeth, cutting edges, or there is a hazard that pieces injury. Always wear safety there is a hazard that broken jure people in the surrounding o one in the surroundingarea.
When using a hammer, pins may fly scattered. This may lead to serious If h ard metal parts such as pins, b bearings are hit with a hammer, might be scattered and cause goggles and gloves. When hitting pins or bucket teeth, pieces might be sent flying and in area. Always check that there is n There is a hazard that the pin hit with strong force may fly out and injure people in th e surrounding area. WELDING WORKS Welding operations must always be carried out by a qualified welder and in a place equip ped with prope r equipment There is a hazard of gas, fire, or elec trocution when carrying out welding, s o never allow any unqualifi ed personne to carry out welding.