. OPERATION DETAILED CONTROLS AND GAUGES Meter Display Portion (1) (2) Engine coolant temperature gauge Fuel gauge (3) Service meter Engine Coolant Temperature Gauge This meter (1) shows the engine coolant temperature. During operation, the indicator should be in range (A). If the indicator enters red range (B) during operation, pilot lamp (C) flashes and the buzzer sounds at the same time. If this happens, run the engine at low idling and wait until pilot lamp (C) goes out and the indicator goes down to range (A). Fuel Gauge This meter (2) shows the fuel level in the fuel tank. F indicates that the tank is full. E indicates that the fuel level is low.
If the fuel level goes below 4.5 liters (1.19 US gal), the indicator enters red range (A), and at the same time, pilot lamp (B) flashes. If the indicator enters red range (A) or pilot lamp (B) flashes, check the fuel level and add fuel. The correct level may not be displayed for a short time after the starting switch is turned to the ON position, but this is not an abnormality. 3 - 7