. OPERATION DETAILED CONTROLS AND GAUGES Pilot Lamps (1) Engine pre-heating monitor (2) Travel speed boost monitor Engine Pre-heating Monitor This monitor (1) flashes when the starting switch is set to the HEAT position. After approx. 18 seconds, the buzzer sounds and the monitor goes out. Travel Speed Boost Monitor This monitor (2) lights up when the speed range selector switch is at high speed. When the speed range is low speed, the monitor goes out. REMARK When traveling at high speed, if the machine travels on soft ground or up a slope and the load increases, the travel is automatically switched to low speed travel, but the travel speed boost monitor displays stays lighted up. 3 - 9