. OPERATION DETAILED CONTROLS AND GAUGES Travel Levers (with Pedals) WARNING pedal so that it cannot be operated. (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral): The machine stops 3 - 20 Do not put your foot on th e pedal unless the machine is traveling. I f you leave your foot on the pe move suddenly, and this foot on the pedal except w the pedal. dal and press it by mistake, the machin e will may lead to a serious accident. Do not r est a hen traveling or steering the machine, u sing If the track frame is facing the rear, the direction of travel operations will be reversed. When operating the trave front or the rear.
(If sprocket (A) is at the re l levers, check if the track frame is facing the ar, the track frame is facing the front.) Take good care when trav When getting in or out of eling or steering the machine, using the operator's compartment, there the p is da edal. nger on the travel pedal, so always fold bac k the This lever (6) is used to c ( ): This indicates operat (a) FORWARD: This leve When operating the peda l, first sit in the operator's seat, then fold out the pedal. After finishing pedal ope rations, fold back the pedal while still eat. seated in the operator's s REMARK If the lever is shifted to th e advance or reverse position from the I neutral position, the alar starting to advance.
m sounds to warm that the machine is is