. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES together with the floor. REMARK When lock pin (10) moves to lock groove (12), the 1st stage lock is completed. NOTICE Check that lock pin (13) is hooked to pin (15) and does not come out. This completes the 2nd stage lock, and and the operation to open the floor is completed. 3 - 33 10. Open inspection window (7), use your left hand to pull floor lock release lever (8) in the directi on of the arrow (to the rear) while holding knob (9) with your ri ght hand and pushing it up in the x 45°).
e unit with the floor and rise up direction of the arrow (appro The canopy or cab form on NOTICE If the floor does not come up, r position. Pull knob (9) back with your right h again. elease lever (8) is not in the release and, then repeat the above procedure If p P a gain. W t hen opening or closing the floor he area under the floor. , do not let any part of your body enter The floor opening operation is as the ambient temperature is low, 11. After the floor rises, push kn the lock groove (12) of lock p 12. Insert the second lock pin (13 ) securely into lock hole (14) from the inside. 13.
Turn until the stopper hook a t the top of lock pin (13) catches securely on pin (15) in the in sertion portion.