STRUCTURE, FUNCTION, & MAINTENANCE STANDARD CENTER SWIVEL JOINT 12 CENTER SWIVEL JOINT 1. Cover 2. Body 3. Slipper seal 4. O-ring 5. Shaft A1. To L.H. travel motor port PB A2. From control valve port A5 C1. To R.H. travel motor port PA B2. From control valve port B5 D1. To R.H. travel motor port PB E. To L.H. and R.H. travel motors port P T2. To tank T1. From L.H. and R.H. travel motors port T D2. From control valve port B2 B1. To L.H. travel motor port PA C2. From control valve port A2 Unit: mm No. Remedy 6 Replace PC210/240-7K 10-99 Check Item Criteria Clearance between rotor and shaft Standard Size Standard clearance Repair limi 80 — —