. SAFETY PRECAUTIONS FOR OPERATION SAFETY PRECAUTIONS FOR OPERATION starting the two switch problem TOWING 2 - 27 When starting with a booster cable, carry out the operation with two wo rkers (one worker sitting in the o seat and the other wo rking with the battery). another machine, do not allow When starting from machines to touch. When connecting the booster cables, turn the starti OFF position for b oth the normal machine and machine. There is a h azard that the machine will move power is connected. Be sure to connect th e positive (+) cable first when ins booster cables. Disco nnect the negative (-) cable (gro first when removing t hem.
When removing the b ooster cables, be careful not to le t the booster cable clips touch each o ther or to let the clips touch the machine. lasses and rubber gloves when starting the engine with booster cables. Always wear safety g lasses and rubber gloves when starting the engine with booster cable When connecting a n ormal machine to a problem ma chine with booster cables, always use a normal machine e. e a normal machine with the same battery voltage as the problem machin For the procedure of s tarting the engine with booster ca bles, see "STARTING ENGINE WIT H BOOSTER CABLE (PAGE 3-131)".
WHEN TOWING Serious injury or death c ould result if a disabled machine is towed incorrectly or if there is a mi stake in the selection or inspection of the wire rope. OD OF TOWING MACHINE (PAGE 3-129)". For towing, see "METH OD OF TOWING MACHINE (PA Always check that th e wire rope used for towing has a mple strength for the weight of the m achine being towed. Never use a wire ro diameter (B), or kink reduced rope may break during the towi Always wear leather gloves when handling wire rope. Never tow a machine During the towing op eration, never stand between the towing machine and the machine be Operate the machine slowly and be careful not to app ly any sudden load to the wire rope.