Operation—Operator’s Station Adjusting Pilot Control Lever Console Height CAUTION: Avoid possible crushing injury from console unexpectedly dropping. Before loosening the holding cap screws, support the console. 1. Ensure engine is off and pilot shutoff lever is in the LOCK position. 2. Remove left and right console holding cap screws (1). 3. Loosen cap screw (2), and adjust the pilot control lever console height relative to the cab floor. TX1000318A –UN–10NOV05 4. Tighten cap screw (2), and install holding cap screws (1). Specification Cap Screws—Torque 49 .....................................................................
36 lb-ft 1—Holding Cap Screws 2—Cap Screw DW90712,0000037 –19–18JAN07–1/1 2-1-18 010609 PN=47