Operation—Monitor Operation Selecting an Attachment From Main Menu A.I. 7777.7 h 1. When the default screen appears, push the menu button (13) to display main menu. F1 F2 F H F3 F4 E 2. Select work mode from main menu by using buttons (1) and (2). Push select button (11). The work mode screen appears. C 8:01 TX1001142 –UN–12DEC05 1 2 3 4 5 13 3. Push the button located under an attachment to be used in order to select the attachment. 6 7 8 9 0 F1 F2 F3 F4 NOTE: When the Digging mode is selected, the default screen will reappear. Default Screen Main Menu 4. On the attachment specification screen, confirm if specification of the installed attachment agrees with that displayed on the screen.
In this example, the Crusher 1 attachment was selected Time Set Attachment Adjustment Operating Conditions Maintenance Settings NOTE: Pushing the back button (12), displays previous screen. 11 1 TX1001143 –19–05JAN06 1 2 3 4 5 5. Push the select button (11), and the default screen appears.
6 7 8 9 0 F1 F2 F3 F4 1—Button 1 2—Button 2 11—Select Button 12—Back Button 13—Menu Button 2 Main Menu Screen Work Mode Dig Breaker 2 2 Breaker 1 1 Breaker 3 3 1 2 3 TX1001687 –19–21DEC05 1 2 3 4 5 6 7 8 9 0 F1 F2 F3 F4 Work Mode Screen Breaker 1 Maximum Pump Flow Rate 288.0 L/min Maximum Engine Speed Valve Selector O/T Accumulator 1800 min -1 OFF 2-Speed Selector ON OFF 2ndary Hydraulic Relief Selector TX1001690 –19–21DEC05 1 2 3 4 5 11 6 7 8 9 0 12 F1 F2 F3 F4 Attachment Specification Screen DW90712,000005D –19–24JAN07–1/1 2-2-8 010609 PN=55