OPERATION DETAILED CONTROLS AND GAUGES Caution Monitors CAUTION If the warning monitor flashes or lights up, carry out inspection and maintenance of the appropriate point as soon as possible. If the problem is not corrected, it may lead to failure of the machine. These are items which need to be observed when the engine is running. If any abnormality occurs, the item need- ing immediate repair is displayed. If there is any abnormality, the abnormal location on the monitor will flash or light up. (1)Charge Level Monitor (2)Automatic Greasing System Monitor(If equipped) Charge Level Monitor This monitor (1) indicates an abnormality in the charging sys- tem while the engine is running.
If the monitor lamp flashes, check the V-belt tension. If any abnormality is found, see "OTHER TROUBLE (PAGE 3-106)". If the monitor flashes, stop the engine immediately or run at low idling, then inspect the problem point immediately and repair the problem. REMARK While the starting switch is ON, the lamp will remain lit and will go off once the engine is started. When the engine is started or stopped with the starting switch at the ON position, the lamp may light up and the buzzer may sound momentarily, but this does not indicate any abnormality. 3-5