DETAILED CONTROLS AND GAUGES OPERATION Display The frequency and preset No. are displayed(6). Controls Of Radio Preset Station Buttons 1. Press the power switch (1) . A frequency will appear on the display (6) . 2. Select a desired frequency using the auto-tuning button (4) or manualtuning button (3) . 3. Press the preset button for 1.5 sec or longer to store the number into the memory. The display (6) will show the preset number when storing is completed. Then, when preset button (5) is released after being pressed for less than 1.5 seconds, the stations stored in the memory can be selected. One station per button can be stored.
Manual Tuning Select a desired frequency by pressing the manual tuning but- ton (3). Each time the switch is pressed, the frequency is changed. If the button is continuously pressed for about 0.5 seconds or more, the frequency also increases or decreases until the button is released. button: Move to a lower frequency station button: Move to a higher frequency station If the frequency reaches the top or bottom limit, it will auto- matically change as follows: top limit bottom limit, or bot- tom limit top limit 3-30