LOADING AND TRANSPORTING THE MACHINE X 75_162a Information signs attached to the machine indicate the attachment points. To avoid damage to the machine, at- tach the eye hooks only to the attachment points. Machine equipment „X“: 2 Brackets, P/N. 42U-98-12A10 4 Screws M16 X 40, Strength class 10.9, P/N. 01016-51640 Screws mounted in the rear frame, inside. Tightening torque: 280 Nm When selecting the lifting equipment, take the operating weight of the machine into account. Insufficient carrying capacities of the lifting equipment may cause severe accidents. Also use carrying wire ropes with appropriate carrying capacities for the operating weight of the machine.
Carrying wire ropes with insufficient carrying capaci- ties may tear when the machine is lifted up and cause severe accidents. The operating weight of the machine de- pends on the attached bucket. You find the operating weights of the machine in the chapter "33. Technical Data". 13