SAFETY MEASURES DURING MAINTENANCE 11.3 DURING MAINTENANCE 11.3.1 ATTACHMENTS Attachments removed from the machine must be stored in a safe location and in such a way that they cannot tip over. Caution - risk of injury! 11.3.2 WORKING UNDER THE MACHINE Always lower all movable work units onto the ground or set them to their lowest positions before you start to perform main- tenance or repair measures under the machine. Block the wheels of the machine using wheel chocks. Do not work under a machine that is not appropriately support- ed. 11.3.3 KEEPING THE MACHINE CLEAN Always keep the machine clean and tidy.
Oil, grease, and tools lying around involve danger, since they may cause slipping or tripping over. Do not clean sensors, plugs, and the interior of the driver's cab with water or steam. If water seeps into the electric system, there is danger of uncontrolled and unintentional movement of the machine which may cause accidents. 11.3.4 SPECIFIC MEASURES Always wear appropriate safety clothes and safety goggles when you perform grinding, welding, use a sledge hammer or perform similar work. 38