Seat Belt 17 1 Warning Adjust seat belt height To adjust the seat belt upwards, directly raise the seat belt height adjustment device until it reaches the proper position. The methods to adjust the seat belt downwards areas follows: 1. Hold the guiding element of the seat belt -1-. 2. Move the guiding element downwards and adjust the seat belt to a position which suits your body. 3. Release the guiding element of the seat belt. 4. After adjusting the seat belt height, tug the seat belt and check whether the guiding element is firmly locked. The protective role of the seat belt can only come into full play when the back rest is in an upright position and the seat belt is correctly fastened.
In the event of an accident, wearing a seat belt incorrectly may cause serious injury to passengers! The seat belt must pass over the mid-part of the shoulders of the passenger. Do NOT tie it round the neck. The seat belt must remain flat and lay close to the chest of the user. The seat belt must pass over the pelvic area of the user. Do NOT press it against the stomach. The seat belt must lay flat, be close to the pelvic area, and be tightened as needed. If the seat belt is not fastened tightly enough and slides towards the stomach or neck, it may cause serious injury to passengers.
Use the seat belt height adjustment device to move the seat belt up and down so that it can fit the body snugly.