TROUBLESHOOTING/ Monitor Unit Screen Display when Maintenance Information Display is ON When only one item is displayed 1. If turning the key switch to the ON position, the starting screen appears. Then, the maintenance information display screen for the item whose change interval has expired appears for ten sec- onds. Finally the primary screen appears. (In the right example, Hydraulic Oil is displayed.) NOTE: As for a machine which the primary screen is displayed according to a password on, the maintenance information display screen for the item whose change interval has ex- pired appears for ten seconds, after the password is input successfully and the con- firm key is pushed.
And then the primary screen appears. 2. If data is rest, push the reset key while the main- tenance information display screen is displayed. The message "Reset Data. OK?" appears. Then, push the confirm key. The value of remaining hours is reset to that of change interval. The previous change date/hour is updated with current date and time. T1V1-05-01-115 Starting Screen Back Key Reset Key T1V5-05-01-170 Maintenance Information Display Screen NOTE: When pushing the back key while the maintenance information display screen is displayed, return to the primary screen. NOTE: When pushing the back key while reset screen is displayed, return to the mainte- nance information display screen.
Back Key Confirm Key T1V5-05-01-171 Reset Screen Primary Screen T1V1-05-01-123 T5-2-60 B R C