TROUBLESHOOTING / e-Shovel LIST OF DAILY REPORT DATA Data which can be downloaded by Dr. ZX (Palm) T5-3-2 Item Details Date Date of daily report data Start: Time Time when key switch is first turned ON during a day (Time is recorded by key switch ON signal.) Stop:
Time Time when key switch is last turned OFF during a day (Time is recorded by key switch ON signal.) Fuel Level The value of the final remained fuel during a day (Value is recorded by fuel sensor data from monitor unit.) Fuel Usage Amount The value of fuel used during a day (Value is calculated and recorded by accumulated fuel usage amount from ECM.) Machine Hour Meter Hour meter cumulative hours (Hours are recorded by hour meter from monitor unit.) Engine Operating Hours HP Mode Hours Total engine operating hours selecting HP mode during a day (Hours are recorded by power mode switch information from MC.) P Mode Hours Total engine operating hours selecting P mode during a day (Hours are recorded by power mode switch information from MC.) E Mode Hours Total engine operating hours selecting E mode during a day (Hours are recorded by power mode switch information from MC.) Auto-Idle Switch ON Hours Hours when auto-idle switch is turned ON during a day (Hours are recorded by switch information from MC.) Travel Operating Hours Fast Idle (Hi) Traveling Hours Total operating hours of travel mode (Hi) during a day (Hours are recorded by travel mode switch information from MC.) Slow Idle (Lo) Traveling Hours Total operating hours of travel mode (Lo) during a day (Hours are recorded by travel mode switch information from MC.) Swing Operating Hours Total swing operating hours during a day (Hours are recorded by swing pressure sensor information from MC.) Digging Operating Hours Total operating hours selecting front attachment during a day (Hours are recorded by front attachment pressure sensor information from MC.) Attachment Operating Hours Breaker Operating Hours Total operating hours selecting breaker during a day (Hours are recorded by attachment information from MC.) Secondary Crusher Operating Hours Total operating hours selecting secondary crusher during a day (Hours are recorded by attachment information from MC.) Primary Crusher Operating Hours Total operating hours selecting primary crusher during a day (Hours are recorded by attachment information from MC.) Vibrating Hammer Operating Hours Total operating hours selecting vibrating hammer during a day (Hours are recorded by attachment information from MC.) Bucket Operating Hours or Others Total operating hours selecting bucket during a day (Hours are recorded by attachment information from MC.)