SAFETY PRACTICE SAFE MAINTENANCE To avoid accidents: Understand service procedures before starting work. Keep the work area clean and dry. Do not spray water or steam inside cab. Never lubricate or service the machine while it is moving. Keep hands, feet and clothing away from power-driven parts. Before servicing the machine: 1. Park the machine on a level surface. 2. Lower the bucket to the ground. 3. Turn the auto-idle switch off. 4. Run the engine at slow idle speed without load for 5 minutes. 5. Turn the key switch to OFF to stop engine. 6. Relieve the pressure in the hydraulic system by moving the control levers several times. 7. Remove the key from the switch. 8.
Attach a "Do Not Operate" tag on the control lever. 9. Pull the pilot control shut-off lever to the LOCK position. 10. Allow the engine to cool. SA-028 500-E02C-0520 SA-527 SA-24