HS120V DRIVING & CHASSIS - MAINTENANCE CAUTION 6.3 IMPLEMENT HOLDER (QUICK COUPLER) DISASSEMBLY G5:9HM:=FGH 8F=J=B;7 756=B 9B;=B9 9@97HF=7GMGH9A =B89L Oil seal Snap ring Axle case A LF1W352A LF1W353A When removing the oil seal, replace it with a new one and use a tool not to damage it during installation. In addition, ensure its correct installation direction. 1. Pull up of the hand lever (1) of the attachment holder, and then check that the lock pin (2) is off the bucket slot. Distance setting between the axle case and oil seal (A): 1.5-1.7 mm 2.
Tilt the attachment holder forward and drive the vehicle backwards until the upper connection (3) of the holder comes off the bottom of the bucket top lip in order to remove the bucket. 3. Remove the tilt cylinder covers (1). LF1W354A 3 -41 GMW-0035