EXPLANATION OF COMPONENTS OPERATION SWING BRAKE CANCEL SWITCH NOTICE This switch is installed to make it possible to carry out operation temporarily if any abnormality should occur in the swing brake system. It is not intended for permanent use. Repair the cause of the abnormality immediately. This switch(10) is used to make it possible to carry out opera- tions temporarily if any abnormality should occur in the swing brake system. When normal: Move switch down When abnormal: Move switch up Move the switch up to make it possible to carry out work. ROOM LAMP SWITCH NOTICE Be sure to switch the lamp to the OFF position after use.
If the switch is left at the ON position, the battery will run down. This switch(11) is used to light up the room lamp. ON position: Lights up OFF position: Goes out It will also light up even when the engine is not running. 3-16