SAFETY GENERAL PRECAUTIONS KEEP MACHINE CLEAN 0. If water gets into the electrical system, there is a hazard that it will cause malfunctions or misoperation. Do not use water or steam to wash the electrical system (sensors, connectors). If inspection and maintenance is carried out when the machine is still dirty with mud or oil, there is a hazard that you will slip and fall, or that dirt or mud will get into your eyes. Always keep the machine clean. INSIDE OPERATOR'S COMPARTMENT 0. When entering the operator's compartment, always remove all mud and oil from the soles of your shoes.
If you operate the pedal with mud or oil affixed to your shoes, your foot may slip and this may cause a serious accident. Do not leave parts or tools lying around the operator's compartment. Do not stick suction pads to the window glass. Suction pads act as a lens and may cause fire. Do not use cellular telephones inside the operator's compartment when driving or operating the machine. Never bring any dangerous objects such as flammable or explosive items into the operator's cab. ALWAYS APPLY LOCK WHEN LEAVING OPERATOR'S SEAT 0.
Before standing up from the operator's seat to adjust the operator's seat, always lower the work equipment, set safety lock lever (1) to the LOCK position and parking brake switch (2) to the ON position, then stop the engine. If you accidentally touch the travel or swing lever when they are not locked. The work equipment may suddenly move and cause serious injury. Free Lock When leaving the machine, always lower the work equip- ment to the ground, set safety lock lever (1) to the LOCK position and parking brake switch (2) to the ON position, then stop the engine. Lock all places and always take the key with you and leave it in the specified location. ON OFF 2-7