Controls and Instruments Controls and Displays CommandCenter The CommandCenter is used to display various tractor functions; it allows the user to change the settings for these functions. In addition, it can display certain calculations (average fuel consumption, area worked, etc). LX1037584 —UN—06NOV06 NOTE: The screens on the CommandCenter shown in this Operator's Manual are all in English. The language and units of measurement that actually appear on the tractor can be selected by the operator. Operating the CommandCenter The CommandCenter can be operated as follows: With selection wheel (A), the main menu key (B), confirm key (C) and cancel key (D).
With the 8 brown quick-access keys (E) (the ones that are assigned predefined functions). With the 5 hot keys (F), the functions of which are set by the user. LX1036207 —UN—16AUG05 Selection wheel (A) allows you to scroll through the different screen cells. Key (B) gives access to the main menu of the CommandCenter. Key (C) is used to select or confirm an input. Key (D) is used to cancel an input. The functions of keys (E) are explained in the relevant Sections (e.g. Hitch, Power Take-Off, Additional Equipment).
A—Selection wheel B—Main menu key C—Confirm key D—Cancel key E—Quick-access keys F—Hot keys OU12401,0001CEA -19-16NOV09-1/16 Emergency operation If the connection between the CommandCenter and the regular keys is interrupted, the screen shown opposite appears. The CommandCenter can still be used via the 5 hot keys above the cells shown in the illustration. LX1041034 —UN—09JUN06 A—Cell for main menu B—Cell for cancel C—Cell for confirm D—Cells for selection Continued on next page OU12401,0001CEA -19-16NOV09-2/16 15-8 030612 PN=39