Text-module The fundamental feature of this documentation is that the different tractor types are divided into main assemblies which correspond, with a few exceptions for technical reasons, to the FENDOS structure. These main assemblies are, for example, "0000 - Tractor/General system" ; "1000 - Transmission"; "2000 - Engine" etc. The main assemblies are sub-divided into subassemblies, e.g. "1005 - Transmission control unit"; "1220 - Live PTO" etc. Please see document 0000 A 000009 for an overview of the assemblies. Each assembly is subdivided into various registers which are labelled with a register letter. These are as follows.
A - General E - Testing B - Faults F - Setting and Calibration C - Documents and Diagrams G - Repair D - Component Location H - Service - Info This documentation comprises a large number of self-contained individual documents (=worksheets). These documents can be used for various applications and are available in different languages. Each document is given a unique document code (8), which is made up of the chapter no. (1) (=assem- bly / subassembly), the register letter (2) and the docu-no. (3) and is printed at the right of the footer. A document can, therefore, be clearly assigned to a main assembly/subassembly and the register. Explanation of the header and footer:
PM-Picturemodule PMTAB_Picture Text-module a Register letter d Validity: chassis no. b Chapter / section e Other validity notes c Type validity General Farmer 400 Fav 700 Fav 900 Documentation structure A Date Version Page Documentation structure Capitel Index Docu-No. 12.4.2000 b 1/2 0000 A 000011