20-119 Hydraulic Oil Cylinder Serial No.
Action Items to be inspected 1 Clearance between piston rod and sleeve Standard Dimension Tolerance Standard Clearance Minimum Clearance Re-install sleeve Axle Hole Scraper blade lifting 50 -0.080 -0.142 +0.164 +0.007 0.087～ 0.036 0.6 Scraper blade side moving 50 -0.080 -0.142 +0.164 +0.007 0.087～ 0.036 0.6 Traction frame side swing 45 -0.080 -0.142 +0.152 +0.007 0.087～ 0.036 0.6 Front wheel incline 35 -0.080 -0.142 +0.132 +0.006 0.087～ 0.036 0.6 Hinge turning 45 -0.080 -0.142 +0.152 +0.007 0.087～ 0.036 0.6 Power incline turning 40 -0.080 -0.142 +0.132 +0.006 0.087～ 0.036 0.6 Scarifier (optional) 50 -0.080 -0.142 +0.164 +0.007 0.087～ 0.036 0.6 Rear ripper (optional) 50 -0.080 -0.142 +0.164 +0.007 0.087～ 0.036 0.6 2 Clearance between piston rod support and sleeve Scraper blade lifting 80 - - - - Scraper blade side moving 40 -0.025 -0.064 +0.142 +0.080 0.105～ 0.206 1 Traction frame side swing 80 - - - - Front wheel incline 45 -0.025 -0.064 +0.142 +0.080 0.105～ 0.206 1 Hinge turning 45 -0.025 -0.064 +0.142 +0.080 0.105～ 0.206 1 Power incline turning 40 -0.025 -0.064 0 -0.012 0.105～ 0.206 1 Scarifier (optional) 50 -0.025 -0.064 +0.142 +0.080 0.105～ 0.206 1 Rear ripper (optional) 50 -0.025 -0.064 +0.142 +0.080 0.105～ 0.206 1