Scraper B lade The adjusting frame (6) is used to adjust the cutting angle of scraper blade. When the scraper blade is move to edge, the sliding frame is corresponds with the sleeve of sliding elements. When the clearance between the sliding frame and sliding elements is too much and the operation accuracy cannot be obtained, change the sliding frame. Cover plate (12) is used to prevent some problems from occurring, such as the slide is affected or the oil cylinder piston rod is damaged due to the dust and sand on the scraper blade sliding part and side moving oil cylinder. The side moving of scraper blade can be adjusted through the sliding position or support (1). 1. Support 2.
Support frame 3. Scraper Blade Side Moving Oil Cylinder 4. Scraper Blade 5. Edge Blade Plate 6. Adjusting Frame 7. Cutting Edge 8. Bolt 9. Nut 10. Shaft 11. Sliding Frame 12. Cover Plate 20-125