Unit: mm Serial Remarks No.
1 2 Reassemble Sleeve 3 4 5 6 7 Adjust 20-76 Items to be inspected Requirement Clearance between incline pin and incline rod sleeve Standard Value Tolerance Standard Clearance Allowable Clearance Axle Hole 50 -0.025 -0.064 +0.142 +0.080 0.125- 0.206 2.0 Clearance between main pin and sleeve 55 -0.030 -0.076 +0.174 +0.100 0.130- 0.250 2.0 Clearance between incline pin and sleeve 45 -0.025 -0.064 +0.142 +0.080 0.105- 0.206 2.0 Clearance between axle end pin and sleeve 45 -0.025 -0.064 +0.142 +0.080 0.105- 0.206 2.0 Clearance between ball joint and sleeve 55 0 -0.02 +0.02 0 0.02 -0.04 1.0 Clearance between support and sleeve Standard Clearance Clearance Limit 0.12～0.852 2.0 Preload of hub bearing Initial Rotation:
8-12 kg (at P point of hub bolt)