Check Parking Brake Operation Rod Special Tools Travel Inspection Measure with tape the travel distance from top to bottom of parking operation rod. Travel Adjustment The engine should be stopped when conduct adjustment. 1. Insert the screwdriver into the adjusting hole of brake drum and rotate the adjusting gear as per the arrow direction until the lining is contact closely with brake drum, then return to the clearance between the adjusting lining and brake drum. 2. After the clearance between lining and brake drum has been adjusted, pull the operation rod and adjust the soft shaft and make its travel at the ratchet wheel is within 2-3 teeth. 3.
After adjusted, the machine can park on the gradient of 15% and will not slid. Operation Force Inspection Inspect with pressure meter B the operation force. 20-91 Serial No. Part Number Part Description Quantity A Common Use Tools Tape 1 B Pressure Meter 1