SAFETY DISPOSAL OF WASTE MATERIALS Never dump waste fluids in a sewer system, on the ground in rivers, etc. Always drain fluids from your machine into the appropriate containers.Never drain fluids directly onto the ground. Obey appropriate laws and regulations when disposing of harmful objects such as oil, fuel, filters, batteries, coolant, brake fluid and hydraulic oil. Recycle when ever possible. ACCUMULATOR This machine is equipped with an accumulator charged with high-pressure nitrogen gas. Before servicing the accumulator, observe the following precautions: Do not dissemble the accumulator. Do not expose the accumulator to high heat or an open flame. Do not weld on the accumulator.
Do not drill or cut the accumulator. Do not strike or crush the accumulator. When replacing or disposing of the accumulator, always release the nitrogen pressure from the chamber. CRITICAL PARTS Periodically some parts must be replaced due to safety purpose. Even if these parts seem to be in good condition and operating properly they may fail at some point causing possible injury to the operator or pedestrian. Listed are some of the systems containing these components that may fail under extended use: Seat belts. Fuel supply and delivery hoses. Hydraulic system: main delivery hoses and tubing. Hydraulic hoses:
all the hoses that feed and return the hydraulic fluid to and from the work equipment. For additional information: See “WEAR PARTS LIST” on page (3-10) 1-36 PC300LC/HD-7E0