HYDRAULICS 1.43 Diverter valve (56) The diverter valve, if fitted, is attached to a bracket, which is fitted to the rear service plate, to the left side of the chassis member. The valve is connected between the 1st auxiliary section (30) and the 1st service couplings (59) and autohitch manifold (57). The valve is solenoid operated and selected by a rocker switch in the cab. When selected, the valve diverts oil from the 1st auxiliary service to the rear of the machine where it can be utilized to operate trailer tipping or autohitch. Specification:
Solenoid Operating voltage 12V DC Key to Diverter Valve 1 To the 1st service coupling (59) 2 To the 1st service coupling (59) 3 Autohitch manifold (57) 4. Autohitch manifold (57) 5-10. Not used 11. To the 1st auxiliary section (30) 12. To the 1st auxiliary section (30) Manifold (57) The manifold is attached to the rear service plate and is located between the autohitch cylinder (58) and the diverter valve (56). The manifold is used to deliver oil to the autohitch or trailer tipping services.