HYDRAULICS 1.66 Fine jets of hydraulic fluid at high pressure can penetrate the skin. Do not use your fingers to check for hydraulic fluid leaks. Do not put your face close to suspected leaks. If hydaulic fluid penetrates your skin seek mecical help immediately. HYDRAULIC LEVEL Check 1. Position the machine on level ground. 2. Make sure all hydraulic cylinders are fully closed. 3. Stop the engine, apply the parking brake. 4. Open the engine pod cover. 5. Check hydraulic tank sightglass (2), make sure fluid level shows in sightglass and is above the red line. NOTE: Wait for two minutes, after engine is stopped, before checking fluid level. 6 .Replenish fluid if necessary as follows:
The cap maintains an air pressure of 0.3 bar in the hydraulic tank. 7. Clean filler cap (1) and remove. 8. Top up hydraulic tank with fluid to correct level and refit filler cap. 9. Close engine pod cover. 1. Filler cap 2. Sightglass