. SAFETY PRECAUTIONS FOR OPERATION 2 - 26 STARTING WITH BOOSTER CABL If any mistake is ma cables follows operatio n with two workers (on e worke r sitting in th e operator's sea t an d the other working with the ba When s tarting fro achine machin es to touch When c onnecting cables, OFF p osition for both th e n ormal machine an d problem machin e. There is a hazard t hat the ma chine will mo ve when the power i s connecte d. Be s ure to connect the positive (+) cabl e first when i nstalling the booster cables. Di sconnect the negati ve (-) cable (g round side) first whe When r n removin emoving t g them.
he booster cables, be careful not to let the booster cable clips touch each other or to let the clip s touch the machin e. Always wear safet y glasses and rubber gloves when starting the engine with booste r cables. When c onnecting a normal machine to a problem m achine with booster cables, al ways use a normal machine with the same e. battery voltage as the problem machin For the procedure of starting the engine with booster cables, see "STARTING ENGINE WITH BOOSTER CABLE (PAGE 3-136)". 3-136)".