00 Index and foreword SEN00056-01 3. Filing method File by the brochures in the correct order of the form number printed in the shop manual composition table. q Revised edition mark When a manual is revised, the ones and tens digits of the form number of each brochure is increased by 1. (Example: 00, 01, 02 …) q Revisions Revised brochures are shown in the shop manual composition table. 4. Symbols Important safety and quality portions are marked with the following symbols so that the shop manual will be used practically. 5. Units In this shop manual, the units are indicated with International System of units (SI).
For reference, con- ventionally used Gravitational System of units is indicated in parentheses { }. D65EX, PX, WX-15E0 7 Symbol Item Remarks k Safety Special safety precautions are necessary when performing work. a Caution Special technical precautions or other precautions for preserving stan- dards are necessary when performing work. 4 Weight Weight of parts of component or parts. Caution necessary when selecting hoisting wire, or when working posture is important, etc. 3 Tightening torque Places that require special attention for tightening torque during assembly. 2 Coat Places to be coated with adhesives, etc. during assembly. 5 Oil, coolant Places where oil, etc.
must be added, and capacity. 6 Drain Places where oil, etc. must be drained, and quantity to be drained.