156 STARTING AND OPERATING Left Lane Departure — Both Lane Lines Detected For example: If approaching the left side of the lane the steering wheel will turn to the right. When the LaneSense system is on, and both the lane markings have been detected, the system is "armed" to provide visual warnings in the instrument cluster display and a torque warning in the steering wheel if an unintentional lane departure occurs. The lane lines turn from gray to white and the LaneSense telltale is solid green. Lane Crossed (Flashing Yellow Lane Line) With Flashing Yellow Telltale Lane Approached (Solid Yellow Lane Line) With Solid Yellow Telltale NOTE:
The LaneSense system operates with similar behavior for a right lane departure. C HANGING L ANE S ENSE S TATUS When the LaneSense system senses the lane has been approached and is in a lane departure situation, the left lane line flashes yellow (on/ off). The LaneSense telltale changes from solid yellow to flashing yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. The LaneSense system has settings to adjust the intensity (Low/Medium/High) of the torque warning and the warning zone sensitivity (Early/ Medium/Late) that you can configure through the Uconnect system Ъ page189.
Lanes Sensed (White Lines) With Green Telltale When the LaneSense system senses a lane drift situation, the left lane line turns solid yellow. The LaneSense telltale changes from solid green to solid yellow. At this time torque is applied to the steering wheel in the opposite direction of the lane boundary. For example: If approaching the left side of the lane the steering wheel will turn to the right.