160 STARTING AND OPERATING Rear Cross Path View Cargo Camera Pressing the Rear Cross Path soft key will give the driver a wider angle view of the Rear View. The Top View will be disabled when this is selected. Pressing the Cargo Camera soft key will provide a full screen view of the cargo area. NOTE: If the Cargo Camera view was selected through the Surround View screen, exiting out of the Cargo Camera screen will return to the Surround View screen. If the Cargo Camera was manually acti vated through the Controls menu of the Uconnect display, exiting out of the display screen will return to the Controls menu.
Trailer Reverse Guidance Top View Plus Front View The Front View will show you what is immediately in front of the vehicle and is always paired with the Top View of the vehicle. ParkSense Camera View NOTE: Front tires will display on the image when the tires are turned. Front Cross Path View Pressing the Front Cross Path soft key will give the driver a wider angle view of the Front View. The Top View will be disabled when this is selected. Pressing the Trailer Reverse Guidance soft key will provide a full screen view of the cargo area and trailer. Due to wide angle cameras in mirrors, the image will appear distorted. Back Up Camera View Top View will show which doors are open.
Open front doors will cancel the outside image. Pressing the Back Up Camera soft key will provide a full screen rear view with Zoom View. Pressing the Left & Right Tow Mirror Split Screen View button within the Trailer Reverse Guidance screen will display a split screen to allow the driver to see both sides of the trailer at the same time. This view allows the driver to pan left/right to better frame the trailer in the image. Top View Plus Rear View NOTE: If the Rear View Camera view was selected through the Surround View Camera menu, exiting out of the Rear View screen will return to the Surround View menu.
If the Back Up Camera was manually acti vated through the Controls menu of the Uconnect system, exiting out of the display screen will return to the Controls menu. This is the default view of the system in REVERSE and is always paired with the Top View of the vehicle with optional active guidelines for the projected path when enabled. NOTE: Trailer Reverse Guidance can only be selected through the Surround View screen; exiting out of the Trailer Reverse Guidance screen will return to the Surround View screen.