STARTING AND OPERATING 163 If Trailer Reverse Guidance is selected through manually activated Surround View, Back Up Camera, or Cargo Camera, the following deactivation conditions apply: CAUTION! TRAILER CAMERAS — IF EQUIPPED To avoid vehicle damage, the vehicle must be driven slowly when using Surround View to be able to stop in time when an obstacle is seen. It is recommended that the driver look frequently over his/her shoulder when using Surround View.
T RAILER S URROUND V IEW C AMERA S YSTEM — I F E QUIPPED The X button on the display is pressed The ignition is placed in the OFF position The vehicle speed is over 8mph (13km/h) for 10 seconds The Trailer Surround View Camera system allows you to see an on-screen image of the surroundings and the Top View of a trailer using four mountable cameras. This occurs whenever the More Cams soft button is selected, or when enabled through the Uconnect system. The image will be displayed on the Uconnect display along with a caution note “Check Entire Surroundings”. After five seconds, this note will disappear. WARNING! NOTE: If the vehicle is not equipped with a Pickup Box:
4 Drivers must be careful when backing up even when using the Surround View Camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstructions, or blind spots before backing up. You are responsible for the safety of your surroundings and must continue to pay attention while backing up. Failure to do so can result in serious injury or death. The bottom wedge of the Top View will be displayed in black. The Rear Cross Path soft button will be grayed out. NOTE: The guidelines will not be overlaid on Top View/ Rear View and Full Screen of Rear View.
Trailer Surround View Camera kit is only avail able for vehicles equipped with the Surround View Camera system. Black video will be displayed for the right side of the Top and Rear View, and full screen of the Rear View when the Rear View Camera is not connected. The Trailer Surround View Camera system has programmable settings that may be selected through the Uconnect system Ъ page189. CAUTION! To access all camera options when the vehicle is in REVERSE, select the More Cams button on the surround view screen.
The Trailer Surround View Camera system includes an installation kit with a Trailer Surround View Module and four Trailer Surround View Cameras that must be installed on your trailer prior to connecting to your vehicle. See the installation instructions included with the Trailer Surround View installation kit for more information. Once the Set Up To avoid vehicle damage, Surround View should only be used as a parking aid. The Surround View camera is unable to view every obstacle or object in your drive path. For information on Auxiliary Cameras (if equipped), see Ъ page166. (Continued)